Material Introduction
Sufoner® PEEK is a high temperature, high performance thermoplastic specialty engineering plastic. PEEK can be used continuously at 260 degrees without losing its physical and chemical properties. PEEK has extremely high stiffness and hardness, as well as unique high tensile strength and fatigue strength. In addition, its heat-resistant non-deformation performance and chemical stability are excellent.

Sufoner® PEEK6000C and Rolemide® PEEK 6800CM are ideal for the semiconductor manufacturing industry to meet the requirements of precision microvia processing with a minimum pore size of 0.1mm or less.
Sufoner® PEEK6000C is a composite of polyetheretherketone PEEK and ceramic matrix. It has excellent processability, low cost, ultra-thin thickness (T1-5mm), high wear resistance, low thermal expansion, almost no burr machining, and is not easily deformed. High heat distortion temperature and very good thermal stability.

●Special composite material  Sufoner® PEEK 6800CM sheet
This material is a composite of PEEK and other custom formulated materials, which combines strength, stiffness and stability very well. The machining deformation is very small, the burr is very small, and the size is stable. It is especially suitable for high-precision applications. It is an ideal material for semiconductor test sockets, nests, fixtures and packaging equipment.

main feature:
1. The heat dissipation performance reaches 2.1w/(k.m), which is close to 10 times of ordinary PEEK plastic;
2. Less micro-hole burrs under 0.1mm, better electrical properties and hygroscopicity than PEEK;

?Sufoner? PEEK Standard Sizes, Colors, Grades, Brands, Types
Sufoner® PEEKSize
Name Thickness(mm) Width × length (mm)
PEEK6000C Sheet
PEEK 6800CM Sheet
1mm to 5mm 150mm x 210mm
PEEK Sheet 5mm to 40mm 600mmx1200mm
1250mm x1000mm
PEEK6000CRod 1mm to 5 mm 300mm
PEEK Rod 6mm to 100mm 1000mm

Name: ?Polyether etherketone 

Types: Rods,Sheets,Profiles

Grades include: 
● Rolemide® PEEK unfilled
● Rolemide® PEEK+GF 
●  Rolemide® PEEK6000C (ceramic filled)
●  Rolemide® PEEK 6800CM
● Rolemide® PEEK 5800ESD

1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer. 
3. Certain grades available in various colors. 

  • ♦ Extremely high strength and stiffness, good toughness
    ♦ High temperature resistance, can withstand 260 degrees
    ♦ Good thermal stability, good heat resistance and deformation resistance
    ♦ Good creep resistance, self-lubricating performance
    ♦ Good dimensional stability and good radiation resistance
    ♦ Good flame retardancy and good hydrolysis resistance 
Product List

Shenzhen Quanda Innovative Materials Technology Co., Ltd.
Add.: 13/F,Baolong Building B, Longguan West Rd.,Longhua District,Shenzhen,China.
Tel.: +86-755-28113160
Fax: +86-755-28018885
E-mail: [email protected]
E-mail: [email protected]

Online Service
? HotLine

吉林十一选五开奖历 江西新11选5走势 广西快3开奖号码 金管家期货配资真实吗 股票下跌 能买青海快三的平台 深圳风采玩法图 江西时时彩个位杀号 排列五最简单选号方法 江苏体彩11选5推荐什么码 股票分析方法分为哪两大类 湖北快3走势分布图 百度 幸运飞艇倾家荡产 陕西十一选五任五最多遗漏 今晚广西快乐双彩开奖号 佳永配资体验 481彩票网